Communitygithub.com

OneWave-AI/claude-skills

대규모 병렬 작업(대규모 리팩터링, 다중 파일 마이그레이션, 코드베이스 전반 감사, 벌크 생성)을 위한 2계층 병렬 에이전트 계층 구조를 배포합니다. 최상위 지휘관(Fable 또는 Opus)이 스웜을 조정하고, 사용자는 전력 레벨(Max Power / Heavy / Balanced / Economy)을 선택하여 계층당 Opus/Sonnet/Haiku 모델 구성을 설정합니다. 1계층은 각각 전체 컨텍스트 창을 가진 3~50명 이상의 전문가 에이전트로 구성되며, 2계층은 각 구성원당 2명 이상의 하위 에이전트로 구성됩니다. Git 안전, 계층화된 크기 조정, 사전 배포 게이트, 유령 완료 검사, 다중 웨이브 후속 작업을 포함합니다.

claude-skills란 무엇인가요?

Agent Army는 여러 독립적인 AI 에이전트가 대규모 작업을 병렬로 수행하도록 지원하는 Claude Code 스킬입니다. 이 구조는 '스웜(swarm)'이 하나의 컨텍스트를 나누는 방식과 달리, 각 1계층 에이전트가 자체적인 100만 토큰 컨텍스트 창을 독점 사용한다는 점이 핵심입니다. 지휘관(Fable/Opus)은 정찰, 구성, 브리핑, 검증을 담당하고, 사용자가 선택한 전력 레벨에 따라 1계층(3~50명 이상)과 2계층(각 1계층 구성원당 2명 이상)의 하위 에이전트를 조정합니다. 이 스킬은 대규모 리팩터링, 다중 파일 마이그레이션, 코드베이스 전반 감사, 벌크 콘텐츠 생성 등 6개 이상의 독립적인 작업 단위를 동시에 처리해야 할 때 유용합니다. 반면 작업 단위가 적거나, 순차적 의존성이 강하거나, 일관된 작성자 목소리가 필요한 경우에는 사용을 피해야 합니다. Agent Army는 Git 체크포인트, 사전 배포 게이트 검증, 유령 완료 감지, 다중 웨이브 후속 작업, 빌드 검증 등을 포함한 견고한 프로토콜을 제공하여 안전성과 신뢰성을 보장합니다.

지원 대상✓Claude Code~Codex CLI~Cursor
npx skills add https://github.com/OneWave-AI/claude-skills/tree/HEAD/agent-army

즐겨 사용하는 AI에게 물어보기

이 에이전트 스킬이 미리 로드된 새 채팅을 엽니다.

문서

Agent Army

2계층 병렬 실행 프레임워크입니다. 지휘관은 최상위 모델(기본값 Fable, 또는 세션 모델인 경우 Opus)로 정찰, 구성, 브리핑, 검증을 담당합니다. 사용자가 배포 시 선택한 계층(전력 레벨 참조)에 따라 하위 모델 스웜을 조정합니다. 각 1계층 에이전트는 자체적인 전체 컨텍스트 창(슬라이스가 아님)을 가집니다. 각 에이전트는 그 아래에 2계층 하위 에이전트를 생성합니다. 결과적으로 하나의 두뇌를 나누는 것이 아니라 여러 개의 독립적인 두뇌가 동시에 실행됩니다.

Commander (you — Fable or Opus, the session model)
 |
 |-- Layer 1: Team (3 to 50+, each = own 1M context, L1 tier from power level)
 |    |-- Agent A (1M) -- Sub-agent A1, A2, ...  (L2 tier)
 |    |-- Agent B (1M) -- Sub-agent B1, B2, ...  (L2 tier)
 |    |-- Agent C (1M) -- Sub-agent C1, C2, ...  (L2 tier)
 |    |-- ... (no cap)

스웜 vs. 군대: 스웜은 하나의 컨텍스트 창을 하위 에이전트들 사이에 나눕니다(하나의 두뇌, 분할됨). 군대는 각 1계층 구성원에게 자체 창을 제공합니다. 이 차이가 이 스킬의 핵심입니다.

사용 시기

  • 여러 파일에 걸친 대규모 리팩터링
  • 다중 파일 색상 / 스타일 / 이름 / API 마이그레이션
  • 광범위한 코드베이스 감사(보안, 접근성, 성능, 데드 코드)
  • 벌크 콘텐츠 생성 또는 변환
  • 동시에 실행할 수 있는 6개 이상의 독립적인 작업 단위가 있는 모든 작업

사용하지 말아야 할 시기

  • 6개 미만의 독립적인 작업 단위인 경우 — 그냥 직접 수행
  • 각 단계가 이전 단계의 출력을 필요로 하는 강한 순차적 종속성이 있는 경우
  • 단일 파일 변경
  • 모든 출력에서 일관된 작성자 목소리가 필요한 작업(병렬 에이전트는 드리프트 발생)

작업이 명확하게 적합하지 않은 경우, 군대를 가동하는 대신 인라인으로 수행할 것을 제안하고 말합니다.

  1. 모든 1계층 에이전트는 반드시 2명 이상의 하위 에이전트를 생성해야 합니다. 예외는 없습니다. 하위 에이전트가 없는 1계층 에이전트를 배포하려는 경우 중단하고 재구성하십시오.
  2. 절대 조용히 군대 규모를 줄이지 마십시오. 사용자가 선택한 계층을 일치시키십시오. 반드시 이탈해야 하는 경우 그 이유를 명확히 말하십시오. 2b. 절대 조용히 모델을 다운그레이드하지 마십시오. 모든 에이전트 호출에 사용자가 선택한 전력 레벨에 따라 model:을 명시적으로 전달하십시오. 생략하면 세션 모델을 상속받는데, 이는 조용한 Max Power 청구입니다.
  3. 하위 에이전트 배포 지침은 1계층 브리핑 내부에 있어야 합니다. 누락되면 하위 에이전트가 생성되지 않습니다.
  4. 에이전트 완료 시 보고: [Agent N/M complete] name: X files modified, Y flags.
  5. 군대 계획을 표시하고 배포 전에 배포 게이트를 통과시키십시오(전체 모드). 빠른 모드는 내부적으로 계획을 구성하지만 여전히 게이트를 통과합니다.
  6. 각 웨이브 후: 빌드와 유령 완료 검사를 실행하십시오(Verify 참조). 에이전트의 녹색 보고서는 주장일 뿐 증거가 아닙니다.
  7. "계속" / "멈추지 마" = 연속 모드: 하나가 완료되는 즉시 새 에이전트를 시작하십시오. 기다리지 말고 다시 묻지 마십시오.

군대 규모

시작하기 전에 계층을 확인하십시오. 다음 표를 제시하십시오:

| Tier         | L1 Agents | Total w/ Sub-agents | Est. Tokens  |
|--------------|-----------|---------------------|--------------|
| Conservative | 3         | ~9                  | ~200-500K    |
| Standard     | 5-10      | ~15-30              | ~500K-1.5M   |
| Aggressive   | 10-20     | ~30-60              | ~1.5-4M      |
| Maximum      | 20-50+    | ~60-100+            | ~4M+         |
| Custom       | you pick  | you pick            | varies       |

"그냥 해"의 경우 기본값은 **표준(Standard)**입니다. 정찰(3단계) 후 발견된 내용에 따라 특정 숫자를 권장하십시오. 예: "6개 도메인에 걸쳐 35개 파일 → 공격적(Aggressive): 8명의 L1 에이전트, 각각 2-3명의 하위 에이전트(총 ~22명, ~2M 토큰). 조정하시겠습니까?" 토큰 추정치는 대략적이며 작업 복잡도에 따라 확장됩니다.

전력 레벨

크기는 에이전트 수를 설정하고, 전력은 어떤 모델을 사용할지 설정합니다. 한 질문으로 둘 다 물으십시오(AskUserQuestion이 잘 작동합니다 — 한 번의 호출로 크기와 전력이라는 두 가지 질문). 사용자가 이미 전력 레벨이나 명시적 모델을 지정한 경우 건너뛰십시오.

| Power Level         | Commander          | Layer 1 | Layer 2 | Best For                                        |
|---------------------|--------------------|---------|---------|-------------------------------------------------|
| Max Power           | Fable/Opus (session)| Opus   | Opus    | gnarly refactors, correctness-critical migrations|
| Heavy (recommended) | Fable/Opus (session)| Opus   | Sonnet  | most large tasks — smart orchestration, fast exec|
| Balanced            | Fable/Opus (session)| Sonnet | Sonnet  | mechanical migrations with clear patterns        |
| Economy             | Fable/Opus (session)| Sonnet | Haiku   | high-volume, dead-simple find/replace            |

규칙:

  • 지휘관은 항상 세션 모델(Fable 또는 Opus, 사용자 선택)이며 위임되지 않습니다. 세션이 Sonnet 또는 Haiku를 실행 중인 경우 배포 전에 사용자에게 전환하라고 알리십시오(/model 또는 claude --model fable). 지휘관 품질은 군대 품질의 상한선입니다.
  • 모든 에이전트 호출에 모델을 명시적으로 전달하십시오: 팀 구성원의 경우 model: "<L1 tier>"; 1계층 브리핑은 하위 에이전트에 대해 model: "<L2 tier>"를 지시합니다.
  • 모든 전력 레벨에서 에이전트별 승격이 허용됩니다: 무겁거나 복잡한 파일(1000줄 이상, 복잡한 로직)은 해당 하위 에이전트를 한 단계 올릴 수 있습니다. 군대 계획에 승격을 명시하십시오.
  • 감사 웨이브는 전력 레벨에 관계없이 Opus에서 실행됩니다 — 실행자의 작업에 대해 새롭고 더 강력한 검토를 수행합니다. 알림 웨이브는 Haiku로 낮출 수 있습니다.

프로토콜

모드: 범위가 이미 구체적인 경우(파일 경로, 정확한 변경 사항, 계층) 3단계(빠른 모드)로 건너뜁니다. 그렇지 않으면 1단계(전체 모드)부터 시작합니다.

1단계: 접수(전체 모드)

사용자가 이미 컨텍스트를 제공한 경우 한 줄로 확인하십시오: "목표: [X]. 범위: [Y]. 계층: [Z]. 전력: [P]. 시작합니다." 그렇지 않으면 다음을 요청하십시오: 목표(한 문장), 범위(파일/디렉토리/"모두"), 제약 조건(X를 건드리지 마, Y와 일치), 계층, 전력 레벨.

2단계: Git 체크포인트

  1. git status — 커밋되지 않은 변경 사항 경고, 스태시/커밋 제안.
  2. git checkout -b agent-army/checkpoint-{timestamp}를 실행한 다음 다시 전환합니다. 이것이 롤백 포인트입니다.
  3. Git 저장소가 없습니까? 안전망이 없다고 경고하고 명시적 확인을 받으십시오.

3단계: 정찰

  1. Grep / Glob / Read를 사용하여 영향을 받는 모든 파일을 찾습니다.
  2. 작업 단위 수를 셉니다.
  3. 각 파일에 대해 wc -l을 실행합니다. 500줄 이상의 파일을 **무거움(heavy)**으로 표시 → 단독 할당.
  4. 도메인별로 분류합니다(디렉토리, 가져오기 그래프, 파일 형식, 명명 패턴 기준).
  5. 공유 종속성을 식별합니다 — 도메인 간에 가져오는 기반 파일(foundation files). 이 파일을 먼저 처리합니다(5단계).
  6. 빌드 명령을 식별합니다(package.json, Makefile 등).

출력: Files: N | Heavy: [list] | Domains: [list] | Shared deps: [list] | Build cmd: [cmd]

4단계: 구성

  1. 공유 종속성을 위한 기반 에이전트(Foundation Agent) — 종속자가 충돌하지 않도록 병렬 웨이브 전에 실행됩니다.
  2. 1계층: 도메인당 하나의 에이전트; 큰 도메인은 여러 에이전트로 나눕니다.
  3. 2계층: L1 에이전트당 2명 이상의 하위 에이전트, 파일 수가 아닌 가중치 파일 로드(weighted file load) 기준으로 할당:
    • 작음(<200줄): 하위 에이전트당 2-3개
    • 중간(200-500): 하위 에이전트당 1-2개
    • 무거움(500+): 하위 에이전트당 1개, 단독
  4. 모든 에이전트 이름을 지정합니다. 모든 파일을 정확히 하나의 하위 에이전트에 할당합니다 — 중복 없음, 누락 없음.

군대 계획을 출력합니다. 전체 모드: "진행하시겠습니까?" 일시 중지; 빠른 모드: 한 줄 요약 후 배포.

배포 게이트

배포 전에 응답에 다음 체크리스트를 출력하십시오. 머리 속으로 확인하지 말고 작성하십시오.

DEPLOYMENT GATE:
[ ] 모든 L1 브리핑에 "You MUST spawn N sub-agents" 포함
[ ] 모든 하위 에이전트가 특정 파일 할당과 함께 명명됨
[ ] 모든 파일이 정확히 하나의 하위 에이전트에 의해 소유됨(중복 없음, 누락 없음)
[ ] L1 브리핑에 전체 하위 에이전트 배포 지침 포함
[ ] 계층이 사용자 선택과 일치
[ ] 전력 레벨 설정: 모든 L1 호출에 `model: "<L1 tier>"`; 모든 브리핑에 L2 계층 및 승격 포함

모두 통과(PASS)해야 합니다. 하나라도 실패(FAIL) 시 배포 전에 계획을 수정하십시오.

5단계: 배포

  1. 기반 에이전트를 먼저(있는 경우) L1 계층으로 실행합니다. 완료될 때까지 기다립니다.
  2. 모든 1계층 에이전트를 병렬로 시작합니다 — 모든 호출에 run_in_background: true 및 model: "<L1 tier>"를 사용하여 단일 메시지로 전송합니다.
  3. 각 L1 에이전트는 브리핑에 따라 L2 하위 에이전트를 병렬로 생성합니다.
  4. 각 완료를 보고합니다: [Agent N/M complete] name: results.

6단계: 검증

  1. 재스캔 — 3단계 검색을 다시 실행하여 남은 위반 사항을 확인합니다.
  2. 유령 완료 검사 — git diff --stat를 실행하고 에이전트 보고서와 교차 참조합니다. "완료, N개 파일 수정됨"이라고 보고했지만 일치하는 diff가 없는 에이전트는 거짓말을 했거나 아무것도 하지 않은 것입니다 — 다시 파견하십시오. 보고서가 아닌 diff를 신뢰하십시오.
  3. 빌드 — 빌드 명령을 실행합니다. PASS/FAIL을 기록합니다.
  4. 보고서에서 **팀 간 플래그(flags)**를 해결합니다.
  5. 군대 보고서를 출력합니다:
Agents: N | Files modified: N (diff-confirmed) | Skipped: N | Build: PASS/FAIL
Flags: [list] | Phantom completions caught: N | Rollback: git checkout agent-army/checkpoint-{timestamp}

웨이브

각 웨이브는 새롭고 더 작고, 다르게 특화된 군대입니다. 각 웨이브 전에 사용자 승인을 위해 일시 중지하십시오. 최대 4개 웨이브.

WaveNameTriggerPurpose
1실행(Execute)항상변경 사항 적용
2감사(Audit)빌드 실패, 남은 위반, 20개 이상 파일, 또는 플래그 > 0새로운 에이전트가 Wave 1을 정확성/엣지 케이스 검토
3전파(Propagate)변경 사항이 API/타입/인터페이스에 영향; 테스트나 문서가 이전 패턴 참조테스트, 문서, 설정, 다운스트림 호출자 업데이트
4알림(Notify)사용자 동의 시PR 설명, 변경 로그, Slack 요약 초안 작성

각 웨이브의 보고서는 다음 웨이브의 정찰 자료입니다. 각 웨이브 후 검증을 다시 실행하십시오. 재스캔이 깨끗하고 빌드가 통과하거나 4개 웨이브에 도달하면 중지하십시오.

재개 / 스크래치패드

다중 웨이브 또는 중단 가능한 실행의 경우 Wave 1 후에 .army-state.md를 작성하십시오: 수정된 파일(diff 확인됨), 열린 플래그, 해결되지 않은 문제, 결정 사항. 실행이 중단되면 다음 호출 시 이 파일을 읽고 재시작하는 대신 마지막으로 깨끗한 웨이브부터 재개합니다. 단일 웨이브 작업의 경우 건너뜁니다.

1계층 프롬프트 템플릿

이는 생성된 에이전트가 실제로 보는 내용입니다 — 스킬에서 가장 중요한 섹션입니다.

You are [AGENT_NAME], specialist on [DOMAIN].

Objective: [one sentence]
Approved patterns: [exact values — hex codes, class names, API shapes]
Forbidden patterns: [what to remove/avoid]
Your files: [absolute paths with line counts]
Rules: [constraints]. Skip files already using approved patterns (idempotency).
Flag issues outside your files in "Flags for Commander" — do NOT fix them.

CRITICAL: You MUST use the Agent tool to spawn the sub-agents listed below. Do
NOT do the work yourself. Do NOT skip spawning. Deploy ALL sub-agents in a single
message with multiple Agent tool calls, passing model: "[L2_TIER]" on every call
[note escalations: except "NAME" which gets model: "[higher tier]"].

Sub-agents:
- "[NAME]": [files with line counts]
- "[NAME]": [files with line counts]

Pass each sub-agent: objective, their files, approved/forbidden patterns, rules,
report format. After all complete, aggregate their reports and verify (by re-reading
or grepping) that no forbidden patterns remain in your domain before reporting back.

2계층 프롬프트 템플릿

You are [SUB_AGENT_NAME], working under [TEAM_MEMBER_NAME].

Objective: [one sentence]
Files you own: [absolute paths with line counts — touch only these]
Approved / Forbidden patterns: [exact values to use and remove]
Rules: [constraints]. Skip files already correct. Flag issues outside your files —
do NOT fix them.

Process: read each file fully → check idempotency → apply approved, remove forbidden
→ re-read to confirm no forbidden patterns remain.

Report: Files Modified (file: N replacements), Files Skipped (already correct),
Flags for Commander, Issues, Status (COMPLETE/PARTIAL/FAILED).

보고서 형식

모든 에이전트는 다음을 반환합니다:

## Report: [Name]
Files Modified:   [file: N replacements]
Files Skipped:    [file: reason]
Flags for Commander: [issue or "None"]
Issues:           [issue or "None"]
Status:           COMPLETE / PARTIAL / FAILED

안티패턴

이 스킬이 방지하기 위해 존재하는 실패 모드입니다. 스스로 이러한 행동을 발견하면 중단하고 수정하십시오.

  • 유령 팬아웃(Phantom fan-out) — L1 에이전트가 하위 에이전트를 생성하는 대신 스스로 작업을 수행합니다. 속도 이점이 모두 사라집니다. 필수 규칙 1 + 게이트에 의해 적용됩니다.
  • 유령 완료(Phantom completion) — 에이전트가 아무것도 편집하지 않고 COMPLETE를 보고합니다. 보고서를 신뢰하지 않고 git diff --stat 교차 검사로 포착됩니다.
  • 조용한 축소(Silent shrink) — 사용자가 공격적(Aggressive)을 선택했는데 조용히 3개의 에이전트를 실행합니다. 항상 이탈 사항을 표면화하십시오.
  • 모델 드리프트(Model drift) — 에이전트 호출에서 model:을 생략하여 모든 하위 에이전트가 조용히 지휘관의 모델을 상속받습니다. 사용자가 Economy를 선택했는데 Max Power로 청구되었습니다. 필수 규칙 2b + 게이트에 의해 적용됩니다.
  • 소유권 중복(Overlapping ownership) — 두 하위 에이전트가 동일한 파일을 편집 → 충돌 및 편집 손실. 게이트의 정확히 하나의 소유자 규칙으로 적용됩니다.
  • 기반 건너뛰기(Skipping the foundation) — 공유 파일이 업데이트되기 전에 종속자를 건드리면 → 연쇄적인 깨진 가져오기. 기반 에이전트가 먼저 실행됩니다.
  • 작은 작업에 군대 사용(Army for a small job) — 4개 파일에 9개 에이전트는 더 느리고(오케스트레이션 오버헤드) 토큰을 소모합니다. "사용하지 말아야 할 시기"를 참조하십시오.

오류 처리

  • 하위 에이전트 실패 → L1 에이전트가 해당 파일을 재시도하거나 대체 에이전트를 생성합니다.
  • L1 에이전트 실패 → 지휘관이 동일한 브리핑으로 대체 에이전트를 생성합니다.
  • 빌드 실패 → 체크포인트 브랜치와의 diff를 통해 중단점을 격리한 다음 수정 웨이브를 실행합니다.
  • 유령 완료 → 해당 에이전트의 파일을 새 에이전트에 다시 파견합니다.
  • 재실행 시 멱등성 → 에이전트가 먼저 이미 적용된 패턴을 확인하므로 군대를 두 번 실행해도 두 번 적용되지 않습니다.

작업 예시

사용자

…

[번역을 위해 잘림]

Individual skills in this repo

This repo contains 20 individual skills — each has its own dedicated page.

OneWave-AI/claude-skills

Generate animated videos and motion graphics from natural language descriptions. Creates a standalone Vite + React project with Framer Motion scenes that auto-play in the browser. Use when the user wants to create animations, motion graphics, video intros, animated presentations, or product demos.

OneWave-AI/claude-skills

Use before starting a product, feature, MVP, agent, automation, or integration build to identify the main pre-build risk and choose the smallest validation step. Trigger when the user asks whether to build, scope, validate, prioritize, or sanity-check an idea before implementation.

OneWave-AI/claude-skills

Post-mortem analysis when a client churns. Takes client history, engagement data, support tickets, usage logs, and exit feedback to produce a comprehensive churn autopsy with root cause classification, timeline of decline, and preventive measures.

OneWave-AI/claude-skills

Compose a premium, animated landing page section by section in Next.js + Tailwind + Motion (Framer Motion) — built on a real design system, with editorial copy and motion that feels human-crafted, not template-generated. Use when building or rebuilding a landing page, marketing site, or hero/feature/pricing/CTA sections that need to look production-ready and bespoke from day one.

OneWave-AI/claude-skills

Assemble 2-3 complementary experts to collaboratively analyze anything. Experts work together to explore topics from multiple expert angles.

OneWave-AI/claude-skills

Convert any topic into playable browser games. Types: trivia, matching, word puzzles, adventure games. Uses Phaser.js or Kaboom.js.

OneWave-AI/claude-skills

Turn a marketing brief or product offer into a finished short-form video ad built in HyperFrames — hook, script, shot-by-shot storyboard, scene-by-scene HTML composition, captions, and voiceover. Outputs platform cuts (vertical 9:16, square, 16:9). Use when you need a launch ad, product promo, social video, or paid-creative concept ready to render.

OneWave-AI/claude-skills

Turn a website URL, product docs, or a founder's rambling description into a tight 60-90 second explainer video built in HyperFrames -- problem/solution narrative, animated product walkthrough scenes, captions, and voiceover, ready for the homepage hero, sales emails, and onboarding.

OneWave-AI/claude-skills

Build promo videos for local businesses in HyperFrames -- the new-menu drop, the seasonal offer, the event announcement, the "we're hiring" post, the Google Business Profile clip. Restaurant, salon, gym, trades: 15-30 seconds, brand-clean, captioned, sized for Instagram, Facebook, and the profile.

OneWave-AI/claude-skills

Build a personalized product-demo or sales-walkthrough video in HyperFrames for a specific prospect or account — narrated screen-by-screen, branded to them, ending in a clear next step. Turns a generic demo into a "this was made for me" asset for outbound, follow-up, or deal acceleration. Use when you want to send a tailored video instead of booking another live call.

OneWave-AI/claude-skills

Turn real customer reviews, quotes, and case-study results into polished social-proof videos built in HyperFrames -- single-testimonial spotlights, review-wall montages, and stat-driven proof reels with captions and voiceover, cut for vertical, square, and wide. The highest-converting content most businesses never make.

OneWave-AI/claude-skills

Audit a codebase for LLM calls that are really classifications in disguise, then produce a costed swap plan for a System One model. Use when asked to cut AI inference cost or latency, when scoping a performance engagement for a client, when reviewing an agent loop that feels slow, or when asked "where could we use Jev here". Produces a ranked table of candidates with measured latency and dollar deltas.

OneWave-AI/claude-skills

Build and run a labelled eval set for a System One model (Jev, Von, or any typed-decision config), then sweep criteria wordings and thresholds against it. Use when a Jev/Von classification is wrong or unreliable, when choosing between the hosted API and a local open model, when tuning noul thresholds, or before shipping any typed-decision feature. Produces an accuracy-by-wording matrix and a calibrated threshold.

OneWave-AI/claude-skills

Wire a System One model (Jev, or an open reproduction like Von) into a product feature — routing, guardrails, scoring, classification. Use when replacing an LLM call that returns a label rather than prose, when adding a typed decision to an agent loop, or when deciding between the hosted Jev API and a local open model. Covers question design, the eval-set-first workflow, threshold calibration, confidence gates, and the traps measured on real data.

OneWave-AI/claude-skills

Optimize landing pages for conversions, performance, and SEO. Use when improving landing pages, increasing conversions, or optimizing page performance.

OneWave-AI/claude-skills

TAM/SAM/SOM calculator with deep market research. Produces comprehensive market-sizing.md with top-down and bottom-up estimates, methodology, data sources, assumptions, sensitivity ranges, growth projections, competitive landscape, and Mermaid visualizations. Use when user needs market size estimates, addressable market analysis, go-to-market sizing, investor-ready market analysis, or business plan market validation.

OneWave-AI/claude-skills

Generate unique personalized first lines for hundreds of prospects using company news, LinkedIn activity, and mutual connections. Saves 10+ hours of manual research per campaign. Use when you need personalized outreach at volume.

OneWave-AI/claude-skills

Review investment portfolios for risk, diversification, fees. Asset allocation recommendations, tax-loss harvesting, rebalancing.

OneWave-AI/claude-skills

Create multiple choice, true/false, fill-in-blank, matching quizzes. Auto-generate plausible distractors. Instant grading with explanations.

OneWave-AI/claude-skills

Enhanced skill navigator that maps conversation history, recommends multi-skill chains, identifies patterns from past usage, and learns from session outcomes. Goes beyond basic scout with deep context analysis and workflow orchestration.

관련 스킬