cli-anything-freecad

cli-anything-freecad은(는) 무엇을 하나요?

FreeCAD를 위한 완전한 CLI 도구 모음 — 17개 그룹, 258개 명령어로 모든 워크벤치 지원.

사전 요구 사항

FreeCAD가 설치되어 있어야 하며, freecadcmd가 PATH에 있어야 합니다.

설치

pip install -e freecad/agent-harness

기본 사용법

cli-anything-freecad --json <command>           # 에이전트용 JSON 출력
cli-anything-freecad --json -p proj.json <cmd>  # 프로젝트 파일 사용
cli-anything-freecad                            # 대화형 REPL

프리뷰, 라이브 프리뷰 및 모션

FreeCAD는 현재 이 브랜치에서 가장 심층적인 프리뷰 통합을 제공합니다.

프리뷰 명령어:

# 프리뷰 레시피 목록
cli-anything-freecad --json -p proj.json preview recipes

# 실제 4-뷰 번들 캡처
cli-anything-freecad --json -p proj.json preview capture --recipe quick

# 폴 모드 라이브 프리뷰 시작
cli-anything-freecad --json -p proj.json preview live start --recipe quick --mode poll --source-poll-ms 500

# 현재 라이브 상태 조회 (렌더링 없이)
cli-anything-freecad --json -p proj.json preview live status --recipe quick

# 라이브 프리뷰 게시 중지
cli-anything-freecad --json -p proj.json preview live stop --recipe quick

일반적인 quick 번들 아티팩트:

• hero.png
• front.png
• top.png
• right.png

라이브 프리뷰 유지 데이터:

• session.json
• 변경 불가능한 번들 디렉토리
• trajectory.json

preview live status --json은 에이전트 전용이며, trajectory_summary와 함께 _session_dir, 현재 번들 참조, _trajectory_path를 포함합니다.

뷰어 명령어:

cli-hub previews inspect /path/to/bundle-or-session
cli-hub previews html /path/to/bundle-or-session -o page.html
cli-hub previews watch /path/to/session --open
cli-hub previews open /path/to/bundle-or-session

모션 명령어는 프리뷰와 별개이며, 최종 정확한 프레임 렌더링 및 쇼케이스 비디오에 사용됩니다:

cli-anything-freecad --json -p proj.json motion new --name spin --duration 6 --fps 24
cli-anything-freecad --json -p proj.json motion keyframe spin --time 0.0 --part 0 --position 0,0,0
cli-anything-freecad --json -p proj.json motion render-video spin output.mp4

명령어 그룹 (258개 명령어)

document (5) — 문서 관리

cli-anything-freecad --json document new --name "Part" -o proj.json
cli-anything-freecad --json document new --profile print3d -o proj.json
cli-anything-freecad --json -p proj.json document info
cli-anything-freecad --json -p proj.json document save -o copy.json
cli-anything-freecad --json document profiles

part (29) — 3D 프리미티브, 불리언, 변환, 연산

# 프리미티브: box, cylinder, sphere, cone, torus, wedge, helix, spiral, thread, plane, polygon_3d
cli-anything-freecad --json -p p.json part add box -P length=20 -P width=15 -P height=5
cli-anything-freecad --json -p p.json part add cylinder -P radius=3 -P height=10 --position 10,7.5,0

# 연산
cli-anything-freecad --json -p p.json part boolean cut 0 1
cli-anything-freecad --json -p p.json part copy 0
cli-anything-freecad --json -p p.json part mirror 0 --plane XY
cli-anything-freecad --json -p p.json part scale 0 --factor 2.0
cli-anything-freecad --json -p p.json part loft --indices 0,1,2
cli-anything-freecad --json -p p.json part sweep 0 1
cli-anything-freecad --json -p p.json part revolve 0 --axis Z --angle 360
cli-anything-freecad --json -p p.json part extrude 0 --direction 0,0,1 --length 10
cli-anything-freecad --json -p p.json part fillet-3d 0 --radius 2
cli-anything-freecad --json -p p.json part thickness 0 --thickness 1
cli-anything-freecad --json -p p.json part compound --indices 0,1,2
cli-anything-freecad --json -p p.json part section 0 --plane XY
cli-anything-freecad --json -p p.json part info 0
cli-anything-freecad --json -p p.json part line-3d --start 0,0,0 --end 10,5,0
cli-anything-freecad --json -p p.json part wire --points "0,0,0;10,0,0;10,10,0"

sketch (26) — 2D 구속 스케치

cli-anything-freecad --json -p p.json sketch new --plane XY
cli-anything-freecad --json -p p.json sketch add-line 0 --start 0,0 --end 20,0
cli-anything-freecad --json -p p.json sketch add-circle 0 --center 10,10 --radius 5
cli-anything-freecad --json -p p.json sketch add-rect 0 --corner 0,0 --width 20 --height 15
cli-anything-freecad --json -p p.json sketch add-arc 0 --center 0,0 --radius 5
cli-anything-freecad --json -p p.json sketch add-ellipse 0 --center 0,0 --major-radius 10 --minor-radius 5
cli-anything-freecad --json -p p.json sketch add-polygon 0 --center 0,0 --sides 6 --radius 10
cli-anything-freecad --json -p p.json sketch add-bspline 0 --points "0,0;5,10;10,0;15,10"
cli-anything-freecad --json -p p.json sketch add-slot 0 --center1 0,0 --center2 10,0 --radius 2
cli-anything-freecad --json -p p.json sketch constrain 0 distance --elements 0,1 --value 10
cli-anything-freecad --json -p p.json sketch edit-element 0 0 --radius 8
cli-anything-freecad --json -p p.json sketch remove-element 0 2
cli-anything-freecad --json -p p.json sketch validate 0
cli-anything-freecad --json -p p.json sketch solve-status 0
# 제약 조건: coincident, horizontal, vertical, parallel, perpendicular, equal,
#   fixed, distance, angle, radius, tangent, symmetric, block, diameter,
#   point_on_object, distance_x, distance_y

body (38) — PartDesign 피처

cli-anything-freecad --json -p p.json body new
cli-anything-freecad --json -p p.json body pad 0 0 --length 10
cli-anything-freecad --json -p p.json body pocket 0 1 --length 5
cli-anything-freecad --json -p p.json body groove 0 0 --angle 360
cli-anything-freecad --json -p p.json body fillet 0 --radius 2
cli-anything-freecad --json -p p.json body chamfer 0 --size 1.5
cli-anything-freecad --json -p p.json body revolution 0 0 --angle 360
cli-anything-freecad --json -p p.json body additive-loft 0 --sketch-indices 0,1
cli-anything-freecad --json -p p.json body additive-pipe 0 0 1
cli-anything-freecad --json -p p.json body additive-helix 0 0 --pitch 5 --height 20
cli-anything-freecad --json -p p.json body additive-box 0 -P length=10 -P width=10 -P height=10
cli-anything-freecad --json -p p.json body hole 0 0 --diameter 5 --depth 10 --threaded
cli-anything-freecad --json -p p.json body draft-feature 0 --angle 5
cli-anything-freecad --json -p p.json body thickness-feature 0 --thickness 1
cli-anything-freecad --json -p p.json body linear-pattern 0 --occurrences 5 --length 50
cli-anything-freecad --json -p p.json body polar-pattern 0 --occurrences 6 --angle 360
cli-anything-freecad --json -p p.json body mirrored 0 --plane XY
cli-anything-freecad --json -p p.json body datum-plane 0 --reference XY --offset 10

material (8) — 공학적 속성을 가진 PBR 재질

# 21개 프리셋: steel, aluminum, copper, brass, titanium, stainless_steel, cast_iron,
#   carbon_fiber, nylon, abs, pla, petg, plastic_white, plastic_black, wood, glass,
#   rubber, gold, concrete, granite, marble
cli-anything-freecad --json -p p.json material create --preset steel
cli-anything-freecad --json -p p.json material create --preset titanium
cli-anything-freecad --json -p p.json material assign 0 0
cli-anything-freecad --json -p p.json material set 0 density 7800
cli-anything-freecad --json -p p.json material import-material mat.json
cli-anything-freecad --json -p p.json material export-material 0 --output mat.json

assembly (11) — 어셈블리 관리

cli-anything-freecad --json -p p.json assembly new --name "MyAssembly"
cli-anything-freecad --json -p p.json assembly add-part 0 0
cli-anything-freecad --json -p p.json assembly constrain 0 coincident --components 0,1
cli-anything-freecad --json -p p.json assembly constrain 0 distance --components 0,1 --distance 10
cli-anything-freecad --json -p p.json assembly solve 0
cli-anything-freecad --json -p p.json assembly dof 0
cli-anything-freecad --json -p p.json assembly bom 0
cli-anything-freecad --json -p p.json assembly explode 0 --factor 2.0
# 제약 조건: fixed, coincident, distance, angle, parallel, perpendicular,
#   tangent, revolute, prismatic, cylindrical, ball, planar, gear, belt

mesh (16) — 메쉬 연산

cli-anything-freecad --json -p p.json mesh from-shape 0 --deviation 0.1
cli-anything-freecad --json -p p.json mesh import path/to/model.stl
cli-anything-freecad --json -p p.json mesh export 0 output.stl --format stl
cli-anything-freecad --json -p p.json mesh boolean union 0 1
cli-anything-freecad --json -p p.json mesh decimate 0 --target-faces 1000
cli-anything-freecad --json -p p.json mesh smooth 0 --iterations 5
cli-anything-freecad --json -p p.json mesh repair 0
cli-anything-freecad --json -p p.json mesh to-shape 0

techdraw (15) — 기술 도면

cli-anything-freecad --json -p p.json techdraw new-page
cli-anything-freecad --json -p p.json techdraw add-view 0 0 --direction 0,0,1 --scale 1.0
cli-anything-freecad --json -p p.json techdraw add-projection-group 0 0
cli-anything-freecad --json -p p.json techdraw add-section-view 0 0
cli-anything-freecad --json -p p.json techdraw add-dimension 0 0 length --references 0,1
cli-anything-freecad --json -p p.json techdraw add-annotation 0 "Note text"
cli-anything-freecad --json -p p.json techdraw export-pdf 0 drawing.pdf
cli-anything-freecad --json -p p.json techdraw export-svg 0 drawing.svg

draft (33) — 2D 드래프팅

cli-anything-freecad --json -p p.json draft wire --points "0,0,0;10,0,0;10,10,0"
cli-anything-freecad --json -p p.json draft rectangle --width 20 --height 15
cli-anything-freecad --json -p p.json draft circle --radius 10
cli-anything-freecad --json -p p.json draft polygon --sides 6 --radius 10
cli-anything-freecad --json -p p.json draft text --content "Hello" --position 0,0,0
cli-anything-freecad --json -p p.json draft move 0 --vector 10,5,0
cli-anything-freecad --json -p p.json draft array-linear 0 --direction 1,0,0 --count 5 --spacing 10
cli-anything-freecad --json -p p.json draft array-polar 0 --center 0,0,0 --count 6
cli-anything-freecad --json -p p.json draft extrude 0 --direction 0,0,1 --length 10
cli-anything-freecad --json -p p.json draft to-sketch 0

measure (12) — 측정 및 분석

cli-anything-freecad --json -p p.json measure volume 0
cli-anything-freecad --json -p p.json measure area 0
cli-anything-freecad --json -p p.json measure distance 0 1
cli-anything-freecad --json -p p.json measure bounding-box 0
cli-anything-freecad --json -p p.json measure center-of-mass 0
cli-anything-freecad --json -p p.json measure check-geometry 0

surface (6) — 서페이스 연산

cli-anything-freecad --json -p p.json surface filling --edges 0,1,2
cli-anything-freecad --json -p p.json surface sections --sections 0,1,2
cli-anything-freecad --json -p p.json surface extend 0 --length 10
cli-anything-freecad --json -p p.json surface sew --indices 0,1

fem (12) — 유한 요소 해석

cli-anything-freecad --json -p p.json fem new-analysis
cli-anything-freecad --json -p p.json fem add-fixed 0 --references face1,face2
cli-anything-freecad --json -p p.json fem add-force 0 --references face3 --magnitude 1000
cli-anything-freecad --json -p p.json fem set-material 0 0
cli-anything-freecad --json -p p.json fem mesh-generate 0 --max-size 5
cli-anything-freecad --json -p p.json fem solve 0
cli-anything-freecad --json -p p.json fem results 0

cam (10) — CNC 가공

cli-anything-freecad --json -p p.json cam new-job 0
cli-anything-freecad --json -p p.json cam set-stock 0 --stock-type box
cli-anything-freecad --json -p p.json cam set-tool 0 --diameter 6 --type endmill
cli-anything-freecad --json -p p.json cam add-profile 0
cli-anything-freecad --json -p p.json cam add-pocket 0 --depth 5
cli-anything-freecad --json -p p.json cam generate-gcode 0
cli-anything-freecad --json -p p.json cam export-gcode 0 output.nc

spreadsheet (7) — 파라메트릭 데이터 테이블

cli-anything-freecad --json -p p.json spreadsheet new
cli-anything-freecad --json -p p.json spreadsheet set-cell 0 A1 "50"
cli-anything-freecad --json -p p.json spreadsheet set-cell 0 B1 "=A1*2"
cli-anything-freecad --json -p p.json spreadsheet set-alias 0 A1 plate_width
cli-anything-freecad --json -p p.json spreadsheet export-csv 0 data.csv

import (13) — CAD/메쉬 파일 가져오기

cli-anything-freecad --json -p p.json import auto model.step
cli-anything-freecad --json -p p.json import step model.step
cli-anything-freecad --json -p p.json import stl model.stl
cli-anything-freecad --json -p p.json import dxf drawing.dxf
cli-anything-freecad --json -p p.json import info model.step
# 형식: step, iges, stl, obj, dxf, svg, brep, 3mf, ply, off, gltf

export (3) — 17개 형식으로 내보내기

# 프리셋: step, iges, stl, stl_fine, obj, brep, fcstd, dxf, svg, gltf, 3mf, ply, off, amf, pdf, png, jpg
cli-anything-freecad --json -p p.json export render output.step --preset step
cli-anything-freecad --json -p p.json export render model.stl --preset stl --overwrite
cli-anything-freecad --json -p p.json export presets

session (4) — 실행취소/재실행

cli-anything-freecad --json -p p.json session undo
cli-anything-freecad --json -p p.json session redo
cli-anything-freecad --json -p p.json session status
cli-anything-freecad --json -p p.json session history

JSON 출력

모든 명령어는 --json을 지원합니다. 응답에는 구조화된 데이터가 포함됩니다. 오류: {"error": "message"}.

오류 처리

• FreeCAD 누락: 명확한 설치 안내 표시
• 잘못된 유형: 유효한 옵션 목록 표시
• 인덱스 범위 초과: 유효한 범위 보고
• 파일 존재: --overwrite 사용

에이전트 프리뷰 참고 사항

• 기하학적 변경 후 시각적 확인이 필요할 때는 preview capture --json을 사용하세요.
• 반복적인 빌드 루프에는 preview live start를 사용하고, 프로젝트 파일이 반복 저장되는 경우 폴 모드를 선호하세요.
• 전체 trajectory.json을 읽기 전에 저렴한 상태 프로브로 preview live status --json을 사용하세요.