jiaosdesign-pixel/popbook

popbook 是做什麼的？

One page of a pop-up book is one JSON file (a "moment") built from a kit of paper pieces. scripts/build.mjs turns one or more moments into one HTML file. The photo is reference only: it never goes into the book.

Read first: references/kit.md (every piece, its parameters, the palette keys it reads, the fold-flat rules), then the example in examples/ nearest in subject to the photo: a shore or a ride (bay-trail), a garden, a house or a festive scene (filoli-halloween), a landmark (golden-gate), a shop or a café (cafe).

Inputs

• A photo (look at it), a line in the sender's own words, or both. Usually both.
• Place and date, in this order of trust: their line, the photo's EXIF, the file name. scripts/photo.py <photo> prints the date, GPS, size and a palette guess (use its scene colours; ignore its cover and stripes, the house block keeps those). Read the place off the file name yourself if it has one. A file date with no EXIF is often wrong (a re-saved photo carries the save date): ask. If the place is unknown, ask one question and keep working on everything else.
• If they already have a book (a folder of moment files), the new page joins it: build all the files together.

The bar

The four examples are the standard. Measure against the nearest one before you hand anything over.

• 4 to 6 story pieces in 3 or more layers, back, middle and front. The engine rejects more than 6; fewer than 4 reads empty.
• Two things to play with besides the sky dial: one the reader taps (a bell, a gull, a door) and one they drag (a pull-tab, a lever, a slider, a revolving picture). check.mjs lists both and fails if either is empty. kit.md section 1, "What answers the reader", lists every piece that takes a tap or a drag. If nothing in their photo or line can be tapped, ask one question before adding anything ("Was there anything else there, like a bird, a flag, a bell or a door?"). If the answer is no, hand the page over below the bar and say so.
• One living loop. Something in the scene moves on its own by day: traffic, a rider, a boat, steam, a bird, a flag, leaves. Pick what travels or breathes in the photo or the line. Taps, drags and the opening hints do not count. check.mjs prints alive: and fails when it is empty.
• Kit first. Build everything you can from existing pieces: hills, trees and hedges as layer bands, lamps, a figure, a rider, birds. A new kit piece only for the one thing the sender would point at, and at most one per page (see "A new piece").
• Only what is in the photo or the line. No props for decoration. If the scene stays thin because the photo is simple, say so rather than inventing.
• The house light and book, unchanged. new.mjs writes the house block (book shape, cover, page edges, lamp, light, camera). Day is a soft studio light, night is moonlight with the lamps on; time of day and weather live in the palette, the sky dial and the lamps, never in the light.
• The figure is the sender unless they say otherwise. Dress them from the photo (palette.figure: coat, scarf, legs, hair, skin). With only a line, keep the example's figure colours unless they say what they wore, and say in the note what you guessed. No scarf in the photo: set scarf to the coat colour. Never add a person, a pet or a companion they did not mention.

The loop

1. Read the photo. python3 scripts/photo.py <photo> --swatches swatches.png, then look at it yourself: what is back, middle, front; the one thing they would point at; what moves on its own and what could be touched; time of day; weather.
2. Scene brief (your own notes): binding (side, the V-fold panorama, for almost everything); layers back to front and the kit piece for each; the tap and the drag; the living loop; what carries the night (lamps, windows, the dial's moon, a headlight); the palette from photo.py's guess, lifted and warmed a step (the book is paper, not a print), pruned to the keys the pieces read (kit.md section 3).
3. Start the page. node scripts/new.mjs <id> --place "Place, City" --date YYYY-MM-DD --dir <their book folder> --like <nearest example>. The id is short and kebab-case (bay-trail, cafe). Fill pieces and the scene palette. Give every piece the reader can tap or drag a label, two or three plain words ("Sailboat", "Café door"): the keyboard path and screen readers use it.
4. Fold-flat. Every layer has to lie flat when the book shuts. Side-bound: each half of a layer at crease x0 folds along the gutter, so x0 + height * 0.966 <= 0.75 (book width 1.5, hinge 105 degrees). The layers at the back get the least headroom: at x0 0.46 a half may stand 0.3, at x0 0.52 only 0.24. A dial, a bird or a figure on a layer counts in its height. A layer near the reader also folds toward the reader's edge, so keep its reach short: roughly x0 - reach * 0.26 >= -0.75. The validator checks both and names the half and how far it reached. A vfold-wrap half with nothing on it still gets a tie strip, so declare its reach at least tieReach (0.12), not less. The sky dial is riveted behind its host layer: keep that layer low where the dial sits (an estate tree line takes a dip), or the dial hides.
5. Build and check. node scripts/build.mjs <dir>/*.json --out <dir>/book.html --title "<their title>" --author "<their name, if they gave one>", then node scripts/check.mjs <dir>/book.html --page <id> (shots land in <dir>/shots/<id>/). It prints the validator's errors, the play lists and alive:, and saves phone and desktop shots by day and by night plus card.png. Look at the shots, night first: glow, lamps and windows only show their mistakes at night. Put the phone day shot beside the nearest example's (build.mjs examples/<that>.json and check it): if yours looks emptier, it is not done. Iterate here, not after handing it over.
   • No Playwright? The book also checks itself: open book.html in a browser. A page with errors is skipped and the errors are printed on the page.
6. Caption. Their line, polished two ways: first person, one sentence, plain words, about 10 words or fewer. The place line sits right under the caption, so the caption never repeats the place: say what happened or how it felt, not where. Make the two options genuinely different (one closer to their words, one shorter). Never add a fact, a feeling or a person they did not give you. Put option 1 in caption and offer option 2.
7. Hand it over. Send book.html (it is the whole book: they can open it, email it, or host it anywhere), card.png if you made one, and a short note:

   <Place> · <Mon D>
   In the scene: <one line, back to front>
   Play: tap <what>, drag <what>, turn the sun dial
   On its own: <what moves by itself>
   Caption: 1. <option 1>  2. <option 2>
   

   Add one line only for something they must know (a guessed date, a thin photo, a new kit piece).

The team

If your agent can hand work to helpers (sub-agents), a page that needs a new kit piece goes faster split four ways. A kit-only page is faster done alone: the hand-offs cost more than they save. The Scout and the Editor need only the sender's words and photo, so run them at the same time; the Builder waits for the Scout, the Reviewer for the Builder.

• Scout: steps 1 and 2. Gets the photo and the line. Hands back the scene brief, the scene palette as a JSON fragment, and the one question for the sender if there is one.
• Builder: steps 3 to 5, plus the new piece if the brief needs one. Gets the brief, the palette and the photo. Runs build and check and fixes what they show. Hands back the moment file, the check.mjs output and the shots folder.
• Reviewer: builds nothing. Gets the shots, the photo or the line, and the nearest example's shots. Looks night first, phone first: the bar (a tap, a drag and the living loop), fold-flat, nothing clipped at the page edge or hidden behind another layer, and every piece is in the photo or the line. Hands back "ready" or a numbered list of fixes, each naming the piece. The Builder fixes and rebuilds, and the Reviewer looks again. After three rounds, hand over with what is still open.
• Editor: step 6. Gets the line, the place and the date, never the shots. Hands back the two caption options.

You do step 7 yourself. Put a review point in the note only if it stayed open.

A new piece

When the photo's hero is something the kit cannot make (a lighthouse, a carousel), add one piece in book/kit/ following the nearest existing one: paper materials from book/engine/paper.js, taps and drags the way shop-front (book/kit/cafe.js) and layer-rider (book/kit/panorama2.js) do, idle loops in tick(t, dt, loops) that run only while loops is true. Register it in book/kit/index.js with build, about and, for side binding, panorama: true and declare. The engine writes each part's matrix every frame, so anything you place or animate sits in a group inside the part, never on the part's root. Light, dark, reduced motion and touch come from the engine; do not special-case them. Expect an hour or more; a kit-only page takes minutes.

What the reader gets

One HTML file of about 1.8 MB: the open book, the caption and place under it, a Day / Night switch (the dial in the book turns it too), and arrows and date tabs when there is more than one page. It needs WebGL and a recent browser; it makes no network requests. Drag, tap and keyboard all work (Tab reaches each playable piece, Enter taps, arrow keys drag).

Rules that do not bend

• The photo never goes into the book or the folder you hand back. No names, ages or details of anyone the sender did not put in the line.
• Every word in the caption and the place is theirs or confirmed by them.
• Say what you could not check: the scripts never cover Safari, Firefox, a real phone or a screen reader.