NeverSight/learn-skills.dev

OpenTrade Wallet Portfolio CLI

4 commands for supported chains, wallet total value, all token balances, and specific token balances.

Pre-flight Checks

Every time before running any opentrade command, always follow these steps in order. Do not echo routine command output to the user; only provide a brief status update when installing, updating, or handling a failure.

1. Confirm installed: Run which opentrade. If not found, install it:

   curl -sSL https://raw.githubusercontent.com/6551Team/openskills/main/skills/opentrade/install.sh | sh
   

   If the install script fails, ask the user to install manually following the instructions at: https://github.com/6551Team/openskills

2. Check for updates: Read ~/.opentrade/last_check and compare it with the current timestamp:

   cached_ts=$(cat ~/.opentrade/last_check 2>/dev/null || true)
   now=$(date +%s)
   

   • If cached_ts is non-empty and (now - cached_ts) < 43200 (12 hours), skip the update and proceed.
   • Otherwise (file missing or older than 12 hours), run the installer to check for updates:

     curl -sSL https://raw.githubusercontent.com/6551Team/openskills/main/skills/opentrade/install.sh | sh
     

     If a newer version is installed, tell the user and suggest updating their opentrade skills from https://github.com/6551Team/openskills to get the latest features.

3. If any opentrade command fails with an unexpected error during this session, try reinstalling before giving up:

   curl -sSL https://raw.githubusercontent.com/6551Team/openskills/main/skills/opentrade/install.sh | sh
   

4. Find or create a .env file in the project root to override the default API credentials, Load it before performing opentrade operations.

OPEN_TOKEN=your_token_here

Get your API token at: https://6551.io/mcp

Security warning: Never commit .env to git (add it to .gitignore) and never expose credentials in logs, screenshots, or chat messages.

Router Discovery

IMPORTANT: If the user has not specified a trading router, you MUST first discover available routers:

opentrade trade routers

Response format:

{
  "ok": true,
  "data": [
    {
      "api": "v2",
      "created_at": "2026-03-10 01:15:42",
      "is_active": true,
      "name": "6551dex test",
      "quota_reward": 0,
      "trader": "6551dex",
      "updated_at": "2026-03-10 01:15:42"
    },
    {
      "api": "v1",
      "created_at": "2026-03-03 21:24:34",
      "is_active": true,
      "name": "okx test",
      "quota_reward": 0,
      "trader": "okx",
      "updated_at": "2026-03-03 21:24:34"
    }
  ]
}

Usage:

• Extract trader and api from the response
• MANDATORY: ALL subsequent opentrade commands in this session MUST include --trader <trader> and --api <api> flags
• Example: opentrade portfolio balance 0x... --chain ethereum --trader okx --api v1
• Default fallback: If the API returns no data or is empty, use --trader okx --api v1

Skill Routing

• For token prices / K-lines → use opentrade-market
• For token search / metadata → use opentrade-token
• For swap execution → use opentrade-dex-swap
• For transaction broadcasting → use opentrade-gateway

Quickstart

# Get supported chains for balance queries
opentrade portfolio chains

# Get total asset value on XLayer and Solana
opentrade portfolio total-value --address 0xYourWallet --chains "xlayer,solana"

# Get all token balances
opentrade portfolio all-balances --address 0xYourWallet --chains "xlayer,solana,ethereum"

# Check specific tokens (native OKB + USDC on XLayer)
opentrade portfolio token-balances --address 0xYourWallet --tokens "196:,196:0x74b7f16337b8972027f6196a17a631ac6de26d22"

Chain Name Support

The CLI accepts human-readable chain names and resolves them automatically.

Chain	Name	chainIndex
XLayer	xlayer	196
Solana	solana	501
Ethereum	ethereum	1
Base	base	8453
BSC	bsc	56
Arbitrum	arbitrum	42161

Address format note: EVM addresses (0x...) work across Ethereum/BSC/Polygon/Arbitrum/Base etc. Solana addresses (Base58) and Bitcoin addresses (UTXO) have different formats. Do NOT mix formats across chain types.

Command Index

#	Command	Description
1	opentrade portfolio chains	Get supported chains for balance queries
2	opentrade portfolio total-value --address ... --chains ...	Get total asset value for a wallet
3	opentrade portfolio all-balances --address ... --chains ...	Get all token balances for a wallet
4	opentrade portfolio token-balances --address ... --tokens ...	Get specific token balances

Cross-Skill Workflows

This skill is often used before swap (to verify sufficient balance) or as portfolio entry point.

Workflow A: Pre-Swap Balance Check

User: "Swap 1 SOL for BONK"

1. opentrade-token    opentrade token search BONK --chains solana               → get tokenContractAddress
       ↓ tokenContractAddress
2. opentrade-portfolio  opentrade portfolio all-balances --address <addr> --chains solana
       → verify SOL balance >= 1
       ↓ balance field (UI units) → convert to minimal units for swap
3. opentrade-dex-swap     opentrade swap quote --from 11111111111111111111111111111111 --to <BONK_address> --amount 1000000000 --chain solana
4. opentrade-dex-swap     opentrade swap swap --from ... --to <BONK_address> --amount 1000000000 --chain solana --wallet <addr>

Data handoff:

• tokenContractAddress from token search → feeds into swap --from / --to
• balance from portfolio is UI units; swap needs minimal units → multiply by 10^decimal
• If balance < required amount → inform user, do NOT proceed to swap

Workflow B: Portfolio Overview + Analysis

User: "Show my portfolio"

1. opentrade-portfolio  opentrade portfolio total-value --address <addr> --chains "xlayer,solana,ethereum"
       → total USD value
2. opentrade-portfolio  opentrade portfolio all-balances --address <addr> --chains "xlayer,solana,ethereum"
       → per-token breakdown
       ↓ top holdings by USD value
3. opentrade-token    opentrade token price-info <address> --chain <chain>  → enrich with 24h change, market cap
4. opentrade-market   opentrade market kline <address> --chain <chain>      → price charts for tokens of interest

Workflow C: Sell Underperforming Tokens

1. opentrade-portfolio  opentrade portfolio all-balances --address <addr> --chains "xlayer,solana,ethereum"
       → list all holdings
       ↓ tokenContractAddress + chainIndex for each
2. opentrade-token    opentrade token price-info <address> --chain <chain>  → get priceChange24H per token
3. Filter by negative change → user confirms which to sell
4. opentrade-dex-swap     opentrade swap quote → opentrade swap swap → execute sell

Key conversion: balance (UI units) × 10^decimal = amount (minimal units) for swap.

Operation Flow

Step 1: Identify Intent

• Check total assets → opentrade portfolio total-value
• View all token holdings → opentrade portfolio all-balances
• Check specific token balance → opentrade portfolio token-balances
• Unsure which chains are supported → opentrade portfolio chains first

Step 2: Collect Parameters

• Missing wallet address → ask user
• Missing target chains → recommend XLayer (--chains xlayer, low gas, fast confirmation) as the default, then ask which chain the user prefers. Common set: "xlayer,solana,ethereum,base,bsc"
• Need to filter risky tokens → set --exclude-risk 0 (only works on ETH/BSC/SOL/BASE)

Step 3: Call and Display

• Total value: display USD amount
• Token balances: show token name, amount (UI units), USD value
• Sort by USD value descending

Step 4: Suggest Next Steps

After displaying results, suggest 2-3 relevant follow-up actions:

Just completed	Suggest
portfolio total-value	1. View token-level breakdown → opentrade portfolio all-balances (this skill) 2. Check price trend for top holdings → opentrade-market
portfolio all-balances	1. View detailed analytics (market cap, 24h change) for a token → opentrade-token 2. Swap a token → opentrade-dex-swap 3. View price chart for a token → opentrade-market
portfolio token-balances	1. View full portfolio across all tokens → opentrade portfolio all-balances (this skill) 2. Swap this token → opentrade-dex-swap

Present conversationally, e.g.: "Would you like to see the price chart for your top holding, or swap any of these tokens?" — never expose skill names or endpoint paths to the user.

CLI Command Reference

1. opentrade portfolio chains

Get supported chains for balance queries. No parameters required.

opentrade portfolio chains

Return fields:

Field	Type	Description
name	String	Chain name (e.g., "XLayer")
logoUrl	String	Chain logo URL
shortName	String	Chain short name (e.g., "OKB")
chainIndex	String	Chain unique identifier (e.g., "196")

2. opentrade portfolio total-value

Get total asset value for a wallet address.

opentrade portfolio total-value --address <address> --chains <chains> [--asset-type <type>] [--exclude-risk <bool>]

Param	Required	Default	Description
--address	Yes	-	Wallet address
--chains	Yes	-	Chain names or IDs, comma-separated (e.g., "xlayer,solana" or "196,501")
--asset-type	No	"0"	0=all, 1=tokens only, 2=DeFi only
--exclude-risk	No	true	true=filter risky tokens, false=include. Only ETH/BSC/SOL/BASE

Return fields:

Field	Type	Description
totalValue	String	Total asset value in USD

3. opentrade portfolio all-balances

Get all token balances for a wallet address.

opentrade portfolio all-balances --address <address> --chains <chains> [--exclude-risk <value>]

Param	Required	Default	Description
--address	Yes	-	Wallet address
--chains	Yes	-	Chain names or IDs, comma-separated, max 50
--exclude-risk	No	"0"	0=filter out risky tokens (default), 1=include. Only ETH/BSC/SOL/BASE

Return fields (per token in tokenAssets[]):

Field	Type	Description
chainIndex	String	Chain identifier
tokenContractAddress	String	Token contract address
symbol	String	Token symbol (e.g., "OKB")
balance	String	Token balance in UI units (e.g., "10.5")
rawBalance	String	Token balance in base units (e.g., "10500000000000000000")
tokenPrice	String	Token price in USD
isRiskToken	Boolean	true if flagged as risky

4. opentrade portfolio token-balances

Get specific token balances for a wallet address.

opentrade portfolio token-balances --address <address> --tokens <tokens> [--exclude-risk <value>]

Param	Required	Default	Description
--address	Yes	-	Wallet address
--tokens	Yes	-	Token list: "chainIndex:tokenAddress" pairs, comma-separated. Use empty address for native token (e.g., "196:" for native OKB). Max 20 items.
--exclude-risk	No	"0"	0=filter out (default), 1=include

Return fields: Same schema as all-balances (tokenAssets[]).

Input / Output Examples

User says: "Check my wallet total assets on XLayer and Solana"

opentrade portfolio total-value --address 0xYourWallet --chains "xlayer,solana"
# → Display: Total assets $12,345.67

User says: "Show all tokens in my wallet"

opentrade portfolio all-balances --address 0xYourWallet --chains "xlayer,solana,ethereum"
# → Display:
#   OKB:  10.5 ($509.25)
#   USDC: 2,000 ($2,000.00)
#   USDT: 1,500 ($1,500.00)
#   ...

User says: "Only check USDC and native OKB balances on XLayer"

opentrade portfolio token-balances --address 0xYourWallet --tokens "196:,196:0x74b7f16337b8972027f6196a17a631ac6de26d22"
# → Display: OKB: 10.5 ($509.25), USDC: 2,000 ($2,000.00)

Edge Cases

• Zero balance: valid state — display $0.00, not an error
• Unsupported chain: call opentrade portfolio chains first to confirm
• chains exceeds 50: split into batches, max 50 per request
• --exclude-risk not working: only supported on ETH/BSC/SOL/BASE
• DeFi positions: use --asset-type 2 to query DeFi holdings separately
• Address format mismatch: EVM address on Solana chain will return empty data — do NOT mix
• Network error: retry once, then prompt user to try again later
• Region restriction (error code 50125 or 80001): do NOT show the raw error code to the user. Instead, display a friendly message: ⚠️ Service is not available in your region. Please switch to a supported region and try again.

Amount Display Rules

• Token amounts in UI units (1.5 ETH), never base units (1500000000000000000)
• USD values with 2 decimal places
• Large amounts in shorthand ($1.2M)
• Sort by USD value descending

Global Notes

• --chains supports up to 50 chain IDs (comma-separated, names or numeric)
• --asset-type: 0=all 1=tokens only 2=DeFi only (only for total-value)
• --exclude-risk only works on ETH(1)/BSC(56)/SOL(501)/BASE(8453)
• token-balances supports max 20 token entries
• The CLI resolves chain names automatically (e.g., ethereum → 1, solana → 501)
• The CLI handles authentication internally via environment variables — see Prerequisites step 4 for default values