DaVinci Resolve Color Grading (drone-first)
A node-based grading workflow for DaVinci Resolve, tuned for DJI drone footage (Avata 2, Neo, Mini/Air series shot in D-Log M) but usable for any log footage.
Method credit: the four-level grading structure follows KC ian, "The Highest Level of Color Grading: No LUTs, No Plugins" (https://www.youtube.com/watch?v=53gcbJPP5eA). Gyroflow stabilization and the DJI LUT fast path are additions for drone footage.
0. Working principles
- Grade one hero clip first, show before/after, get approval, then propagate to the rest.
- Enter values by typing into fields (double-click, select all, type, Return) rather than dragging, so numbers are exact and repeatable.
- After each change, check the scopes, not just the viewer.
- Never delete media or overwrite a saved project version without asking. Save after each level.
- Before touching a clip that already has a grade, add a new grade version (Color > Grade Version > Add) so the original can be restored.
- Ask the user only for creative choices (look direction, how stylized). Check everything technical on screen yourself.
Useful macOS shortcuts on the Color page: Shift+6 Color page · Opt+S add serial node · Shift+S add serial node before current · Opt+L layer mixer · Opt+P parallel node · Cmd+D toggle node · Shift+D bypass whole grade · Cmd+Opt+G grab still. (Windows/Linux: replace Cmd with Ctrl, Opt with Alt.)
UI notes:
- Node context submenus (Gamma, Color Space, LUT) can be finicky to open by hover — click the parent item.
- Gain/Lift/Gamma numeric fields under each wheel are ordered Y, R, G, B.
- Avoid "Cleanup Node Graph" in recent versions; it can stack nodes on top of each other (Cmd+Z undoes only the layout).
- Color > Nodes > Add Outside Node is more reliable from the menu bar than via shortcut.
1. Intake
Check on screen first: Resolve version, Studio or free (Help > About), timeline color settings, clip codec/resolution.
Ask the user briefly:
- Which clips / timeline to grade.
- Look direction: natural/clean, or stylized (film-like, teal/orange, moody).
- Fast path (LUT) or full path (CST)? Default: CST path if Resolve lists DJI D-Log M in Color Space Transform, otherwise LUT path.
Drone assumptions: 10-bit D-Log M, in-camera stabilization (RockSteady/HorizonSteady) off — required for Gyroflow. If a clip was shot in Normal color or with in-camera stabilization on, skip Gyroflow and treat it as Rec.709.
2. Project setup
- Project Settings > Color Management: color science DaVinci YRGB.
- CST path: timeline DaVinci Wide Gamut / DaVinci Intermediate, output Rec.709 Gamma 2.4.
- LUT path: timeline and output Rec.709 Gamma 2.4.
- DJI LUT: download the official D-Log M to Rec.709 LUT for your drone from DJI, put the .cube in Resolve's LUT folder (Project Settings > Color Management > Open LUT Folder), then click Update Lists.
- Scopes (Workspace > Video Scopes): Waveform/Parade + Vectorscope. For luminance work set the waveform to Data Levels with Colorize off.
- Timeline aspect: most FPV drones shoot 4:3. For 16:9 delivery, set clip Retime and Scaling > Scaling to Fill (crops top/bottom) or keep Fit (pillarboxed).
3. Node tree
Build once on the hero clip, label every node, then save as a PowerGrade.
01 GYROFLOW stabilize (spatial ops first)
02 PRE-LUT LIFT LUT path only: lift shadows before the LUT clips them
03 NORMALIZE IN CST D-Log M → DWG/DI | LUT path: DJI LUT
04 NR Studio only, light temporal NR
05 LIGHT REBALANCE gradient window, gamma luma L1
06 EXPOSURE HDR wheels / primaries luma L1
07 WB node gamma Linear, Gain wheel L1
08 CONTRAST Custom curves Y, pivot at middle gray L1
09 SHAPE subject lift + outside-node surround L1
10 RGB MIXER color compression L4
11 TONE GAMMA Color wheels L3
12 TONE LOG Log wheels L3
13 HUE v SAT or Color Slice L2
14 LUM v SAT "hero zone" L2
15 CLEANUP qualifier fix, optional L2
16 SOFT CLIP L3
17 NORMALIZE OUT CST DWG/DI → Rec.709 (CST path only)
18 TEXTURE Studio: glow / halation / grain
Order: normalize → fix light → compress color → tone → hierarchy → polish. Levels are learned 1→4, but the nodes sit in the order above. Skip nodes the footage doesn't need.
4. Gyroflow (node 01)
- First check whether it's already applied (Edit page > Inspector > Effects; clips with effects show an
fxbadge). If Status reads OK, leave it. - Otherwise drag Gyroflow (Effects > OpenFX) onto node 01. If it isn't installed, tell the user (free OFX plugin from gyroflow.xyz) and continue without it only if they agree.
- Click Load for current file. If the free version of Resolve can't resolve the path, use Browse and pick the source MP4. Status should read OK (DJI MP4s embed gyro data).
- Starting values: Smoothness 50 (70 for cinematic, lower for punchy FPV), Lens correction 100, Zoom limit ~130.
- Horizon lock 100 if the user wants level horizons (removes FPV roll; crops in slightly).
- Apply on source-timed clips, before any retime.
- Playback gets slow: Playback > Render Cache > Smart, or cache node 01.
5. Normalize
CST path: Color Space Transform. Input DJI D-Gamut / DJI D-Log M → Output DaVinci Wide Gamut / DaVinci Intermediate, no tone/gamut mapping. Node 17: DWG/DI → Rec.709 / Gamma 2.4, tone mapping DaVinci, gamut mapping Saturation Compression, Apply Forward OOTF on. Middle gray = 0.336.
LUT path (fast): right-click the node > LUT > DJI > D-Log M to Rec.709. Everything after grades in Rec.709. Middle gray = 0.435.
Important on the LUT path: the DJI LUT crushes deep shadows to black and can clip highlights. Lifting shadows after the LUT only produces flat gray. Put a node before the LUT (Shift+S) and adjust there:
- Shadows/forest in shade: Lift Y +0.02, Gamma Y +0.05 to +0.11.
- Bright skies or sun-facing shots: Gain Y down to 0.90–0.96.
LUT path + Level 1 alone is often enough for a clean natural look.
6. Level 1 — Fix the light (luminance only)
Goal: highlights, mids, shadows in the right zones; nothing clipped, nothing crushed. Don't touch saturation yet.
- Exposure. CST path: HDR wheels in DWG — lower Light/Highlight, lift Shadow slightly. Rec.709 path: Primaries Y-only Lift/Gamma/Gain.
- White balance. Right-click node > Gamma > Linear. Neutralize with small Gain R/B moves (±0.02). Neutralize on a white roof, road, rock, cloud or concrete — not grass or sky. Keep golden-hour warmth by neutralizing only partly.
- Middle-gray pivot. 0.336 (DWG/DI) or 0.435 (Rec.709). Pin a curve point there.
- Contrast. Custom Curves, Y channel only (unlink YRGB). Highlights down, shadows up, shaped around the pivot. Use waveform guide lines as clip/crush guards.
- Light rebalance (before exposure). Gradient window over the over-bright side (bright sky, sun-lit slope); lower gamma luma inside only.
- Light shaping. Very soft circle window (softness 15–20) on the subject, gamma luma +0.03; Color > Nodes > Add Outside Node for the surround, gamma luma −0.03. Tracking often fails on fast forward FPV flight — if the subject stays in roughly the same area, use a static soft window and check it at a few points in the clip.
Check: waveform inside the guides, image has depth, subject reads first.
7. Level 2 — Color hierarchy (organize, don't add)
The vectorscope should tighten; nothing except the subject should jump out.
- Hue vs Sat: tame neon greens (forest/fields) and electric cyan in water/sky; balance competing reds/yellows.
- Color Slice (more filmic alternative): lower saturation + density on distracting hues, small boost on the hero color.
- Lum vs Sat — "hero zone": pull saturation down in shadows, gently in highlights; midtones carry the color. Removes the flat, plastic digital look.
- Cleanup (optional): qualifier on a layer node to remove a cast from one surface.
For bright, sunlit plateau/grassland shots, reducing overall saturation to ~44–47 keeps orange grass and blue sky from looking neon.
8. Level 3 — Toning
Turn Level 2 nodes off while toning, back on after.
- Color Wheels: vectorscope Mid, Luma Mix 0, gamma nudged slightly warm.
- Log Wheels: shadows slightly teal (vectorscope Low), highlights slightly warm (vectorscope High). Keep highlight tint very light on skies or they go green-yellow.
- Soft Clip: set Low, then Low Soft to compress shadows; generous High Soft for smooth highlight roll-off on bright skies and sun glare.
9. Level 4 — Color compression (RGB Mixer)
Small moves; watch the vectorscope (and skin, if any people).
- Green output: Preserve Luminance on, increase Blue in Green — blues/greens move to cyan, reds/yellows to orange. More = more stylized.
- If warm tones go too red, add a little Red in Green.
- Blue output: increase Green, reduce Red slightly.
- Revisit Levels 3 and 2 on top of this new base.
Landscapes: foliage should land olive/teal-green, not neon; sky should stay believable blue.
10. Polish (Studio)
- Light temporal NR right after normalize (drone shadows get noisy).
- After the look: optional glow, halation, slight softening (drone footage is often over-sharp), and film grain last (also hides 10-bit sky banding).
11. Editing for a cinematic cut (optional)
If asked to cut the footage down:
- Scrub every ~2 s and drop: very dark stretches, flying straight into the sun, tilted/banking horizons, low blurry ground skims, sky-only frames, repetitive passes, landings.
- Keep a clear arc: reveal → hero subject (e.g. waterfall) → wide landscape → closing shot.
- Razor (Cmd+B), delete, then Edit > Delete Gaps. Add short cross-dissolves (Cmd+T); joins without enough handle frames can stay hard cuts.
- Check the finished cut at frame intervals for horizon tilt; turn on Gyroflow horizon lock for any shot that still rolls.
12. Reuse
- Grab a still and save it into a PowerGrade album (e.g. "Drone Base – LUT"). Next time, apply it and re-tune only Level 1 per clip.
- Grade the hero clip, then copy to others (middle-click). Shared nodes keep Levels 2–4 consistent.
13. Deliver
- YouTube 4K: MP4, H.264 (or H.265), 3840×2160 at timeline frame rate, Restrict bitrate ~80 Mbps for 4K60 (~45 Mbps for 4K30). Rec.709 Gamma 2.4.
- Master: QuickTime DNxHR HQX 10-bit or ProRes 422 HQ.
- Check one export on a phone before batch rendering. Gyroflow clips render slowly.
Troubleshooting
- Crushed black shadows after the LUT: lift in a node before the LUT (Section 5).
- Gyroflow wobble/jello: raise smoothness; check lens profile; confirm in-camera stabilization was off.
- Black borders after Gyroflow: raise zoom limit / adaptive zoom.
- Washed-out image after normalize: wrong input (Normal-color clip treated as D-Log M, or vice versa).
- Curve shifts exposure: pivot moved; re-pin at 0.336 / 0.435.
- Sky banding: gentler curves, add grain, avoid heavy Hue vs Sat on blues.
- Skin odd after RGB Mixer: back off Blue-in-Green, add Red-in-Green.